Technical details

It is mainly used to produce the disposable medical flat face masks automatically: the whole roll of  non-woven fabric is driven by rollers after unwinding, and the fabric is automatically folded and hemmed; the entire length of the bridge of the nose is pulled and unrolled. Welded to the seal, then passed through the ultrasonic side seal, cut and shaped by a cutter; conveyed the mask to the two mask earband welding stations through the assembly line, and finally formed the mask by ultrasonic welding; when the mask was made, it was conveyed through the assembly line to flat belt line for collection.

 

Finished mask sizes: 175*95mm

Production capacity: 80-120 pieces per minute

Whole line size: about 6500mm (L) × 4500mm (W) × 1900mm (H)

Appearance color: off-white matching profile
Weight of our auto face mask production line: ≤5000kg, ground load ≤500KG / m2

Working power:  220VAC, 50HZ, rated power of about 9KW

Compressed air: 0.5 ~ 0.7 MPa, using flow rate of about 300L / min;
Operating environment: temperature 10 ~ 35 ℃, humidity 5-35% HR, no flammable and corrosive gas, no dust (cleanness no less than 100,000).



INQUIRE NOW

If you have any questions, feedback or comments, please fill out the form below and we will reply you back as soon as possible.

+8618561832088